Hyperion Control & Data suite program for the EOS line of chargers.

First of all, the manual can be found here;
http://media.hyperion.hk/dn/pc/ecds-man


It's recommended that you read the "Before you start part";
http://media.hyperion.hk/dn/pc/ecds-...reyoustart.htm


This program require Firmware version 4.3 (or later)
Visit the EOS CHARGER Firmware Update site for the newest version:
http://media.hyperion.hk/dn/pc/eosfw.htm


Finally, the Control & Data Suite program can be found here;
http://media.hyperion.hk/dn/pc/ecds-man/Installer.zip

Current version is: 2010-05-01

This program has a requirement of .NET Framework 3.5
If your computer is not updated this component need to be updated from Microsoft.
http://www.microsoft.com/downloads/d...displaylang=en


For any of you running more then one charger connected to the same computer, READ THIS BEFORE YOU START!
http://media.hyperion.hk/dn/pc/ecds-...rechargers.htm


Note: If you have trouble with SiLabs driver for the chargers, the latest version can be found here;
http://www.silabs.com/products/mcu/p...cpdrivers.aspx


The program will automatically check both Firmware and Software version at startup, if there is a new version you are prompted to do a re-install/update.

/Fredrik